Autor Tema: Joyetech eVic VTC Mini/VTwo/VTwo Mini... custom firmware  (Pročitano 8275 puta)

0 Članovi i 1 gost pregledaju ovu temu.

Van mreže UG22

  • Novajlija
  • *
  • Poruke: 27
  • Karma: 0
    • Lokacija: Subotica
Odg: Joyetech eVic VTC Mini/VTwo/VTwo Mini... custom firmware
« Odgovor #30: Januar 12, 2017, 09:27:38 posle podne »
Radi ko zmaj  :pusac2 , izvrstan meni  :-) :doubleup

Van mreže nikolic015

  • Senior vaper
  • ***
  • Poruke: 362
  • Karma: 7
  • Gljive i budale se ne seju...
    • Lokacija: Loznica
Odg: Joyetech eVic VTC Mini/VTwo/VTwo Mini... custom firmware
« Odgovor #31: Januar 12, 2017, 10:59:21 posle podne »
Pa to je taj ruski ja za drugi nisam cuo

Van mreže Robert

  • Stara garda
  • *****
  • Poruke: 1576
  • Karma: 10
Na taj ruski fazon, (Arctic Fox) rad više programera iz EU, greške su ispravljene, nove funkcije dodate, testira se bez prekida da bude savršen za sve nabrojane modele ;-)

Ps; uskoro kreće još jedan veliki projekat u nekom drugom pravcu ;-) trebalo bi da ćutim, ali nema veze :D
Na primer power bank funkcija sa moda neće biti samo san, nego standard



Sony Xperia ZR
« Poslednja izmena: Januar 13, 2017, 03:50:00 pre podne Robert »

Van mreže Robert

  • Stara garda
  • *****
  • Poruke: 1576
  • Karma: 10
Odg: Joyetech eVic VTC Mini/VTwo/VTwo Mini... custom firmware
« Odgovor #33: Januar 15, 2017, 10:48:03 posle podne »
Update!

Direktan download link:

NToolbox (NFE Tool) (.zip)
https://github.com/TBXin/NFirmwareEditor/releases/download/6.4/NFirmwareEditor-v6.4.0.zip
ArcticFox Firmware latest stable (.bin)
https://github.com/maelstrom2001/ArcticFox/releases/download/170103/af_170103.bin

Ovaj radi bez problema i preko računara ;) Na svim Joyetech / Wismec / Eleaf modovima

Sony Xperia ZR
« Poslednja izmena: Januar 15, 2017, 10:51:51 posle podne Robert »

Van mreže Robert

  • Stara garda
  • *****
  • Poruke: 1576
  • Karma: 10

NFE Team (http://nfeteam.org) presents custom Firmware for Joyetech, Wismec and Eleaf battery mods.



Use [NFE Toolbox](https://github.com/TBXin/NFirmwareEditor/releases) for [installing](https://github.com/maelstrom2001/ArcticFox/wiki/How-to-install) firmware and configuring your device.


Profiles The main difference is the profile based user interface, so to say, the DNA-style, and the larger focus on customization than original Joyetech firmware. Profile is the set of parameters of used atomizer, such as coil material, resistance, power and temperature values. The user have 8 profiles which can be edited with NFE Toolbox, and which can be assigned to his favourite atomizers.


Profiles can be switched automatically, based on saved coil resistance, and in manual mode. All you need to use the automatic switch is to enable "Smart" mode, install atomizer and assign them to the desired profile.

When you re-install this atomizer later, assigned profile will be activated automatically. If resistance of installed atomizer is not found in profiles, you'll be prompted to select new profile or re-assign existing. When you switching manually to profile that have saved resistance mismatch, you'll be prompted to update or keep settings of selected profile.

Main Menu Hold Fire and Plus buttons for a 1 second to enter menu.

Profile Menu






* **Wire** - coil material, temperature sensing or not (VW), can be set to standard or user-defined TFR;
* **Coil** - saved resistance;
* **TCR** - value can be edited when selected Joyetech TC algo with custom TCR;
* **T. Dom** - temperature-dominant regulation style;
* **Preheat** - power control, use preheat or power curve;
* **PI-Reg** - PI Regulator for TC mode, improves power and temperature stabilization: - PI-Reg On/Off - switch between stock Joyetech and PI regulation; - Range - 0..100% - temperature range when PI regulation becomes active. 0 means that regulator is always on and controls power distribution from start of puff, 20% for example - PI regulator turns on when temperature of coil reached 20% range from profile settings; - P - proportional constant, the larger it is, the sharper the power changed; - I - integral constant, the larger it is, the settled power distribution is smoother.

Screen Menu



* **Dim** - time to dim display;
* **Wake plus/minus ** - waking mod by pressing regulatory buttons;
* **Charge** - show additional information on charging screen, battery voltage(s) and board temperature;
* **Logo** - show logo on main screen;
* **Clock** - show clock on screen: - Type - analog or digital; - On Main - show clock on main screen; - Saver - show clock in standby mode;
* **Selector** - show additional profile info on "Select Profile" screen;
* **Contrast** - adjust brightness of display;
* **Skin** - change main screen style.

Settings Menu



* **1 Watt** - increment/decrement power by 1,0 Watt;
* **Menu** - New - switch profiles using Selector, Old - switching via standard Edit Main action;
* **Smart** - automatic switching profiles settings: - On/Off; - resistance tolerance; - show Profile Menu after assigning new;
* **Clicks** - actions assigned on 2/3/4 Fire button clicks: - None; - Edit Main - Joyetech default 3-clicks action; - Profiles - Profiles Selector; - T. Dom - temperature-dominant on/off; - Clock - show/hide clock on main screen; - On/Off - switch mod on/off; - LSL - switch light sleep mode on/off; - Main Menu - enter Main Menu, the same as Fire + ; - Preheat - preheat settings for active profile; - Edit Profile - enter Profile Menu; - Smart On/Off - Show Info Screen
* **RTC** - realtime clock setup;
* **Expert** - settings for advanced users:


* **USB** - Mode - default is HID for connecting to NFE Toolbox, firmware update etc.; COM - adds virtual COM Port (for debug purposes only); - NoSlp - do not enter deep sleep mode while connected to USB; - Charge - device is charging batteries while connected to USB;
* **BVO** - batteries voltages offset;
* **BATT** - battery discharge profile;
* **SHUNT** - Ohm-meter correction;
* **ChkTCR** - check coil material TCR, switching this option to off can eliminate TCR Error on heavy coils;
* **RCOBC** - Reset Counters on Battery Change, clear vaping statistics;
* **X32** - RTC module uses secondary 32768 Hz oscillator, if present;
* **LSL** - Light Sleep Mode, for devices without secondary oscillator keep RTC accurate. It takes some more energy in standby mode, so user will be warned by ! sign right of battery indicator;

Info Screen



Shows brief hardware information and some stats.

________________________________________

________________________________________

Many thanks to:  TBXin - for NFE Products, ideas and tests
Zinger - for graphics, ideas and tests
ClockSelect - for great project called myevic


[Disclaimer: The firmware is distributed in the hope that it will be useful, but without any warranty. It is provided 'as is' without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the firmware is with you.]





Sony Xperia ZR


Van mreže Robert

  • Stara garda
  • *****
  • Poruke: 1576
  • Karma: 10
« Poslednja izmena: Januar 22, 2017, 01:24:56 pre podne Robert »

Van mreže Robert

  • Stara garda
  • *****
  • Poruke: 1576
  • Karma: 10
O ' nekim stvarima ' za napredne korisnike




Sony Xperia ZR


Van mreže Shaka Zuluf

  • Hroničar svakodnevnice
  • ******
  • Poruke: 3804
  • Karma: 52
  • ‘To Start Press Any Key'. Where's the ANY key?
    • Lokacija: Beograd
Večeras sam, u momentu dokolice, turio ovaj firmware na svoj eVic AIO. Primeti se znatna razlika u odnosu na fabrički Joye firmware, mada njega nisam ni apdejtovao već koristim onaj koji je došao sa uređajem.

Onda sam na kratko probao da koristim eVic AIO kao mod, sa Kayfun Lite i Lemo Drop atomizerima. Pošto sam AIO inače koristio isključivo sa oriđiđi Cubis glavama, ne mogu da dam precizan sud kolika je razlika u odnosu na standardni VTC-oliki režim rada.

Softver se lako instalira i koristi, meni je uglavnom intuitivan. Za par stavki sam konsultovao uputstvo od gore, mada većinu tih stavki koje sam proveravao i inače ne bih koristio ili ne umem da koristim  ^-^ Čini mi se da i dalje postoji razlika u odnosu na DNA75, konkretno sam isti atomizer koristio malo na Pylonu pa malo na AIO-u, sa istim podešavanjima. Deluje mi kao da je na AIO rad nekako jači, nafuraniji, mada mi nije grebao grlo kad pojačam (kao što je bilo pre ovog apgrejda). Ovu razliku u radu ćemo svakako proveriti, imam na umu još dva korisnika koji koriste DNA75 pa će AIO ići na dodatni test :)

Na prvi pogled sam uočio i neke nelogičnosti. Npr uzmem VW profil i označim da je žica kantal (iako je u pitanju BF SS316 glava od 0.6 oma), radi jako dobro na otprilike istom podešavanju kao i pre ovog apgrejda.
Prebacim da je žica SS, ista snaga, radi kilavo. Vratim na kantal, radi kao zmaj.

Proveriću kako stoje stvari u narednim danima, u svakom slučaju preporučujem svima koji su zainteresovani da probaju kako ovaj fimver radi.
Never underestimate the power of stupid people in large groups.


Van mreže jokjuar

  • Senior vaper
  • ***
  • Poruke: 250
  • Karma: 5
  • Animals should not try to act like people...
    • Lokacija: Valjevo
Meni je od tog softvera sasvim dovoljno i to što nekoliko atomizera koje menjam zapamti i čim ga zašarafim on promeni snagu koju sam mu zadao kada sam poslednji put koristio. Takođe sam povećao cutoff za par sekundi jer me nerviralo onih 10, kad se zanesem pa me iseče kad je najlepše. Za sada mi je dovoljno i realno mi više ništa ne treba od podešavanja.


Vtc mini je u pitanju.
Sent from my T03 using Tapatalk
"Oh freddled gruntbuggly, Thy micturations are to me As plurdled gabbleblotchits on a lurgid bee. Groop, I implore thee, my foonting turlingdromes, And hooptiously drangle me with crinkly bindlewurdles, Or I will rend thee in the gobberwarts With my blurglecruncheon, see if I don't!"

Van mreže Robert

  • Stara garda
  • *****
  • Poruke: 1576
  • Karma: 10
Odg: Joyetech eVic VTC Mini/VTwo/VTwo Mini... custom firmware
« Odgovor #39: Januar 29, 2017, 04:30:18 posle podne »
TFR (trenutno 316 L) radi fenomenalno u TC režimu, osetno bolje nego 'običan' ;)

Inače fajlove u 'csv' formatu možete preuzeti sa
http://www.steam-engine.org/wirewiz.asp#
Iz menija, DNA 200. :)

Dodatno, tu je za SS 410, ako neko slučajno koristi tu vrstu:
http://bdwteam.net/ecf/Arctic_Fox-410-(TFR%20Curve).csv


Sony Xperia ZR
« Poslednja izmena: Januar 29, 2017, 04:45:56 posle podne Robert »

Van mreže Robert

  • Stara garda
  • *****
  • Poruke: 1576
  • Karma: 10
« Poslednja izmena: Januar 29, 2017, 09:44:18 posle podne Robert »

Van mreže Robert

  • Stara garda
  • *****
  • Poruke: 1576
  • Karma: 10
Odg: Joyetech eVic VTC Mini/VTwo/VTwo Mini... custom firmware
« Odgovor #41: Avgust 21, 2017, 08:41:18 posle podne »
Sve na jednom mestu
http://nfeteam.org/forum/

Sony Xperia ZR


Van mreže Robert

  • Stara garda
  • *****
  • Poruke: 1576
  • Karma: 10
Odg: Joyetech eVic VTC Mini/VTwo/VTwo Mini... custom firmware
« Odgovor #42: Avgust 26, 2017, 06:36:00 posle podne »
17 06 03 je zadnja ' stable ' verzija (ako se ne varam)

Sony Xperia ZR